Product introduction

3216 is a phenolic amine-cured two-component epoxy tiecoat to extend the repaintinginterval. This product provides excellent corrosion and water resistance.

Recommended applications

It is generally used as a transition coating between epoxy coating and physical dryingcoating for good interlayer adhesion in atmosphere and immersion environment. lt canbe used as an anticorrosive primer for underwater coatings, a tiecoat for antifoulingcoatings,and a sealcoat for old antifouling coatings.

Product information

Appearance：Yellow

Volume solids：57±2%

Proportion：7:1 (volume ratio) or 10.1 :1 (weight ratio)

Mixture's pot life：2h (20℃)

Full cure：7d

Recommended DFT：100 μm (corresponding WFT=175 μm)

Theoretical quantity required (125 μm)：5.7 m²/L or 4.4 m²/kg

SG：1.3 kg/L

Flash point：Above 30°C

VOCs：397g/L

Construction conditions

Transition coating: Sand blast or use power tools to remove allrust and other loose materials, and remove all residues.Touch-up to complete film thickness.

Sealcoat for old antifouling coatings: Thoroughly clean or spraywith high-pressure fresh water to remove the hydrolyzed layeron the surface of the old antifouling coatings. Make sure the oldcoatings with weak adhesion between layers are completely removed.

The substrate must have a temperature >3°C above the dewpoint. The environment should be <85%RH.

It is recommended to apply at above -10°c. The painting surfacemust be clean and dry.

It is recommended to maintain strong ventilation duringpainting, drying and curing.

Painting method

Painting methods：Airless spraying

Diluent：103 epoxy diluent

Dilution：0-5% of the coating weight, The actual addition may be adjusted according to the field painting method

Nozzle size：0.43-0.58 mm

Spraying pressure：15-25 Mpa

Film thickness：Non-recommended film thickness may be adopted according to the purpose and area. But this wilchange the coating rateand affect the drying time and repainting interval. The normal dry film thickness of a single coat is: 50-125μm.

Packing specifications：Component A:15.75L,Component B:2.25Lor Component A:23.2kg,Component B: 2.3kg

Shelf life：Base material: 24 months,Curing agent: 24 months

Safety measures：Refer to our Material Safety Data sheet(MSDs)

Disclaimer: The above produtiformatin and data are accumulated acordina to ou experience in experiments and pracicaluse, and can be used as a constuction quideFor painting works that we are not informed, we ony guarantee the qualty ofthe coating itsel,butwe are not responsilble for other problems. We have the righto modify thimanualdue to the continuous improvement of our product.