Product introduction

2230 is a two-component phenolic amine-cured pure epoxyhigh-build coating,which forms acoat with excellentmechanical strength after curing.lt provides excellent wearresistance and seawater resistance.

Recommended applications

This product can be used as a primer or intermediate coat foratmospheric or underwater immersion environment, such as cargohold, deck,underwater parts of hull and other areas requiring lowVOCs and quick drying.This product can be applied at -10°c. Due to itsdrying performance, it is especially suitable for occasions requiringrapid repainting and handling.

Product information

Appearance：Gray/other

Volume solids：77±2%

Proportion：4:1(volume ratio)or 6.53:1 (weight ratio)

Mixture's pot life：1h (20℃)

Full cure：7d

Recommended DFT：125 μm (corresponding WFT=162 μm)

Theoretical quantity required (125 μm)：6.2 m²/L or 4.13 m²/kg

SG：1.5 kg/L (SGs are slightly different for different colors)

Flash point：Above 25℃

VOCs：238 g/L

Construction conditions

New steel: Sand blasting to Sa2.5 and Medium(G) surfaceroughness(ISO 8503-2).

Steel coated with shop primer: Cleaning for sand blasting orgrinding with an elastic grinding wheel to polish the corrodedparts to St3.

The substrate must have a temperature >3°C above the dewpoint. The environment should be <85%RH.

Use this product only when the painting and curing can becarried out normally at above 0°c. The painting surface mustbe clean and dry.

Painting method

Painting methods：airless spraying/air spraying/brush coating/roller coating

Diluent：103 epoxy diluent

Dilution：0-5% of the coating weight, The actual addition may be adjusted according to the field painting method

Nozzle size：0.43-0.64 mm

Spraying pressure：20-25 Mpa

Film thickness：Non-recommended film thickness may be adopted according to the purpose and area. But this will change the coating rateand affect the drying time and repainting interval. The normal dry film thickness of a single coat is: 75-200μm.

Packing specifications：ComponentA:14.4L,component B:3.6Lor Component A: 23kg,component B: 3.5kg

Shelf life：Base material: Base material: 36 months,Curing agent: 12 months

Safety measures：Refer to our Material Safety Data Sheet(MSDs)

Disclaimer: The above produtiformatin and data are accumulated acordina to ou experience in experiments and pracicaluse, and can be used as a constuction quideFor painting works that we are not informed, we ony guarantee the qualty ofthe coating itsel,butwe are not responsilble for other problems. We have the righto modify thimanualdue to the continuous improvement of our product.